Bartell Global Innovatech Terminator T-2200PRO, Complete Manual

Page: 14 / 50

P a g e | 13
OIPB-I03026-T2200PRO_v3.1
• Properly secure the machine with chains, tire chocks, and other necessary tie downs.
• Never ride in a moving vehicle next to a Terminator
®
. It may tip, causing severe injury.
13. Operator Controls
1. Drive/Jaw Controls
The drive and jaw controls are located to the left and right of the operator seat. The
drive joysticks (left and right) control the direction of rotation of the rear wheels. The jaw
height rocker module (right) controls the vertical position of the jaw assembly. The
throttle slider module (left) controls the RPM of the engine.
•
Push the left and right joysticks forward together and hold them in position to move the
machine forward.
•
Pull the left and right joysticks back together and hold them in position to move the
machine in reverse - the alarm will sound.
•
Push only the left joystick forward to turn the machine to the right.
•
Push only the right joystick forward to turn the machine to the left.
•
To move the jaw assembly down, push and hold the jaw rocker upward. To move the
jaw assembly up, push and hold the jaw rocker downward.
2. Auto Stop
When you release the drive joysticks, the motor continues to run but the drive or jaw
motion automatically stops and will not start again until you push or pull the joysticks.
3. Operator Presence Switch & Safety Grips
The Terminator
®
is equipped with a trigger switch on the underside of each joystick grip.
The operator must also be seated to engage the operator presence switch within the
seat. The wheel hydraulics will not function without an operator properly seated and at
least one trigger switch held down. WARNING: The Terminator
®
will stop abruptly if
both trigger switches are released or if the operator leaves the seat while the machine is
moving.
4. Emergency Brake
The Terminator
®
is supplied with an emergency brake to prevent unintended movement
when left unattended. The brake handle is located to the right of the operator seat. Pull
the handle up to engage the brake, push the handle down to release the brake. To
increase tension on the brake you can rotate the end of the handle in a clockwise
direction. Rotate the end of the handle counter clockwise to reduce the tension.
14. Display & Indicators
1. Tachometer & Information Display
The tachometer shows the current RPM. The information display shows the
instantaneous readings of selected engine sensors and can also show any active error
codes from the engine control unit (ECU).
Discount-Equipment.com