9
Never perform any installation or maintenance work on the Wireless X while
it is connected to power!
Only use suitable M20x1.5 Atex or IECEx certified compression or barrier
glands depending on the cable/installation. Make sure a suitable material/
quality is selected to avoid galvanic corrosion with the main aluminum body.
Stainless steel is recommended.
Selection, Installation, Maintenance and repair of electrical apparatus for use
in potentially explosive atmosphere should be done in accordance with IEC/
EN 60079-14/ -17/ -19 . Product installation must be carried out in accordance
with any local codes that may apply and should only be carried out by a com-
petent electrical personnel.
The Wireless X has four different versions:
The next section contains guides for how to install and terminate the cables.
Fiber (FIB)
page 10
Power over ethernet (POE)
page 12
Ethernet and power (ETH)
page 14
Power (PWR)
page 16
Make sure to use cable ferrules on all cables when terminating.
Make sure the earth cable is min. 0.75mm
2
.
PREPARATIONS FOR CABLING AND TERMINATION
Installation