29
Troubleshooting
We recommend using Cisco 27XX, 28XX, 37xx or 38xx series
For other access points, please contact BARTEC first.
Here are some of the access point requirements:
- Access point needs to be brand new when mounted inside the Wireless X
- Access point needs to withstand a pressure of 11,1 bar for min. 10 seconds.
- Access Point needs to be powered by POE or support an Input voltage of 48 volt
- Max RF throughput, Input interfaces (Power/POE etc), size along with maximum and
minimum operating temperatures are also relevant.
If you are unsure if your access point will fit inside the Wireless X, your BARTEC representative
can help you.
FAQ
What type of access points can I use inside the Wireless X?
The location you choose to install your Wireless X affects the signal strength and network speed
you will achieve. To optimize the network coverage:
- Always mount the Wireless X horizontally, with the dome facing down towards the area you
want Wi-Fi coverage.
- Select a central location or one where you use your Wi-Fi-enabled devices most often. This
because the distance from the Wireless X to the Wi-Fi equipment affects performance and signal
strength.
- Steering clear of other electronic equipment can help avoid interference and signal
obstruction.
How do I find the right place to mount the Wireless X?
Your surroundings can affect the Wireless X Wi-Fi performance. Metal (steel construction
materials, doors, etc.), concrete and brick, glass but also equipment like microwave ovens,
cordless phones and other electronic equipment might interfere with the Wireless X Wi-Fi signal.
What could interfere with the Wireless X?
TROUBLESHOOTING
No. The concept of the Wireless X is to keep the antennas inside the Wireless X. However, you
can use access points with external antennas as long as they fit inside the Wireless X.
Does the Wireless X support external antennas?
