Sampling
23
MAK 3003 Measuring system TIGER / LYNX Operating Instructions, Software version 2.35, BA 190130 (11.07.2022)
8.3
Belgium sample
The Belgium sample can only be activated if output 88 is configured. The
WAVE box 100S must be configured to read and write tags.
8.3.1
Procedure
● Move a sample bottle to the filling position.
● Start the intake.
If the sample is active, the system checks whether a sample bottle with a
blank tag is in the filling position when an intake is started.
If the Belgium sample is active, an intake can only take place if a sample bottle
with an empty tag has been detected. If no sample bottle with empty tag was
detected, the intake cannot be started. A corresponding message appears on
the display.
The tag of the cur-
rent sample bottle
is already written.
Replace the sam-
ple bottle.
The tag could not
be
recognised.
Check the posi-
tioning of the sam-
ple bottle or re-
place the sample
bottle.
The symbol for the Belgium sample flashes after switching on and after writing
to a tag.
The blinking stops and the intake can be started only if a new, empty tag is
available.
