Bartec MAK TIGER 3003 Operating Instructions Manual Download Page 22

Page: 22 / 87

Sampling
20

MAK 3003 Measuring system TIGER / LYNX Operating Instructions, Software version 2.35, BA 190130 (11.07.2022)

Sampling

The measuring system can be configured so that a single sample, tour sample
or Belgium sample are automatically activated at the start of the tour.
If there is no automatic activation, you can also activate the sampling manu-
ally.

● Touch one of the softkeys to the left of the display to display the hidden

soft keys.

● Touch the soft key

TOUR SAMPLE

SINGLE SAMPLE

BELGIUM SAMPLE

(

to activate or deactivate the respective function.

The corresponding symbol appears on the display:

Tour sample activated

Single sample activated

Belgium sample activated

(

Output 88 must be configured for the Belgium sample!

The "SMV4 sample" must be activated at tour start (see section 8.4).

Summary of Contents for MAK TIGER 3003
























































































Search results

Summary of Contents for MAK TIGER 3003

Reviews:

Related manuals for MAK TIGER 3003

Brands by name

Popular brands

Bartec MAK TIGER 3003, Operating Instructions Manual

Search results

Summary of Contents for MAK TIGER 3003

Reviews:

Related manuals for MAK TIGER 3003

Brands by name

Popular brands