APEX Pressurised Cabinet
Ex p Slot Printer
Safety
Rev. 0
01-37A2-7D0002_Manual_Exp-Slot-Printer_20220221_0_en.docx
Page 9 of 60
Reservation: We reserve the right to make any technical changes, if we consider them as required. Any changes, errors and misprints do not constitute any grounds for damage claims.
2
Safety
Intended use
Exclusive use
The Ex p slot printer shall serve exclusively as a label printer within explosion
group II, category 2G by means of the explosion protection principle “pressurised
enclosure” according to EN/IEC 60079-2.
The permissible operating data of the used device must be observed.
Improper use
Any other use shall be considered as improper and could potentially lead to
damages and accidents. The manufacturer shall not be liable for any use beyond
the exclusive purpose.
Safety information
General
Do not dry wipe or clean devices in potentially explosive areas!
Do not open devices in potentially explosive areas.
General legal regulations or guidelines on occupational safety, accident
prevention regulations and environmental protection laws must be
observed, e.g. Industrial Safety Ordinance (BetrSichV) or nationally
applicable ordinances.
Suitable clothing and footwear must be worn due to the risk of dangerous
static electricity build-up.
Any effects of heat outside the specified temperature range shall be
prevented (see Chapter on “General technical data”).
Any impacts from moisture must be avoided.
