Installation
APEX Pressurised Cabinet
Ex p Slot Printer
Page 32 of 60
01-37A2-7D0002_Manual_Exp-Slot-Printer_20220221_0_en.docx
Rev. 0
Reservation: We reserve the right to make any technical changes, if we consider them as required. Any changes, errors and misprints do not constitute any grounds for damage claims.
Print head adjustment
If the printout is too light on one side, or if very thick media is printed, or if the
media shifts sideways during the printing process, a pressure adjustment of the
print head may be necessary. Use the lowest possible print head pressure that
will produce a good print result.
The print head pressure adjustment knobs have possible settings from 1 to 4 in
half steps.
Position
Designation
Inside switch
Outside switch
If necessary, change the print head setting for print adjustment as follows:
If the media…
then…
requires a higher pressure in order to
achieve good printing results,
move both dials up by one
position.
