Configuration
BCS3600
ex
series
Hand-held scanner and accessories
138/164
Subject to technical changes.
April 2022 / Revision C
9.6.4
Programming BCS3678
ex
with supply module Ex i - Bluetooth
Pos.
Description
2
Hand-held scanner BCS3608
ex
-IS
Type: 17-A1S4-1HP0/**** (Zone 1/21)
3
Data cable in Ex i version between Ex-HMI (or other Ex device) and supply module
Ex i
this cable has to be provided by the customer
RS232
USB-SPP
4
Power supply
this cable has to be provided by the customer
5
Supply module Ex i Bluetooth for hand-held scanner
Type: 17-A1Z0-0025 (Zone 1/21)
6
Ex-HMI or other Ex device with Ex i interface
(approved for hazardous areas)
The hand-held scanner is paired/connected via Bluetooth with the supply module Ex i -
Bluetooth.
The supply module Ex i - Bluetooth takes over the data transfer to a PC/host via Bluetooth
connection.
The interface parameters of the supply module Ex i - Bluetooth are factory set and a later
change of the programming is not possible.
The values of the supply module Ex i - Bluetooth must therefore be accepted on the PC/host
page 1 to 1 so that a correct data transmission can be done.
Adjustment on the hand-held scanner:
No adjustment of the interface parameters possible, because hand-held scanner is
connected to USM via Bluetooth.
Adjustment on the supply module Ex i - Bluetooth:
Interface parameters are fixed and cannot be changed.
Adjustment on PC/host:
The interface parameters from the PC/host can be adjusted via the settings e.g. in the
device manager, terminal program or application software.
Summary of Contents for BCS3600ex Series
Page 1: ...Hand held scanner BCS3600ex series User Manual...
Page 2: ......
Page 4: ......
Page 173: ......