Bartec BCS3600ex Series, User Manual

Page: 74 / 174

Commissioning
BCS3600
ex
series
Hand-held scanner and accessories
66/164
Subject to technical changes.
April 2022 / Revision C
6.9 Testing the communication (RS232 or USB-SPP)
The serial communication can be checked with the help of a terminal program.
A serial interface does not have its own intelligence.
This means that incoming data at the serial interface will be lost if there is no application
available that can process incoming data.
There is a large number of terminal programs on the market. E.g. Hyperterminal, Tera Term,
Putty or others.
BARTEC does not distribute any terminal program or software keyboard wedge
application.
When using a universal supply module, a software wedge or other application must be
installed on the host PC for data transfer.
The software wedge or other application serves to convert/processing the incoming data
as keyboard input and to enter the data into the currently active field on the host PC.
Terminal Program
The test described below with a terminal program was performed with the H-Term
application. Any other terminal program that supports serial communication can be used
alternatively.
Test communication/data transmission