Bartec BCS3600ex Series, Quick Start Manual

Page: 64 / 76

Faults – causes and
remedies BCS3600
ex
series
Hand-held scanner and accessories
58/68
Subject to technical changes.
March 2021 / Revision B
8 Faults – causes and remedies
Information about the configuration of host parameters and barcode types can be found
in the ZEBRA Product Reference Guide.
If none of the solutions listed leads to the elimination of a fault, please contact the
BARTEC Enterprise Mobility Support:
https://support.pixavi.com/support/home
8.1 Resetting the hand-held scanner
The hand-held scanner can be reset to two types of default settings:

Scanning barcodes for factory settings (see ZEBRA Product Reference Guide,
Chapter 5 - Section "User Preferences - Default Parameters" --- Appendix A lists all
standard default parameters)

Reset to factory default using Zebra 123 Scan Utility Tool.
The following reset (default) options are available:

Factory settings (Factory Default)

User-Defined Standard (Custom Default)
Scan the appropriate barcode below to reset the hand-held scanner to its factory settings
and/or set the current hand-held scanner settings as the user-defined default.
Restore Defaults - Reset hand-held scanner to default settings
With the barcode "Restore Defaults" the hand-held scanner is reset to the following default
settings:

Restore Defaults - Resets all default parameters as follows:
If custom defaults have been configured (see "Write to Custom Defaults"), the custom
defaults will be set for all parameters each time the Restore Defaults barcode specified
below is scanned.

If no user-defined defaults have been configured, the factory defaults will be used for
all parameters when the Restore Defaults barcode specified below is scanned.
(For Factory Default, see Zebra "Product Reference Guide" for DS36X8. "Appendix A,
Standard Default Parameters")

Scanning the “Restore Defaults” barcode.