BCS3600
ex
series
Hand-held scanner and accessories
Commissioning
Subject to technical changes.
March 2021 / Revision B
41/68
6.4.2
Connecting the base station on the host PC and power source
DANGER
Spark formation when connecting a cable!
Only use the base station outside potentially explosive atmosphere.
The base station is supplied with power via the connection cable to the host PC.
There is a separate socket on the connection cable to establish the power
connection via the power supply (type G7-A0Z0-0019). Further information about
the power supply to the base station can be found in the ZEBRA Product Reference
Guide.
Make sure that the power supply is disconnected from the power source before
connecting the connection cable/data cable to the host PC. Otherwise, the base
station may not be able to establish a connection with a new host PC.
1.
Connect the data cable to the host PC.
2.
Open the cover, connect the data cable and close the cover.
3.
Feed the connection cable through the cable gland.
Summary of Contents for BCS3600ex Series
Page 1: ...Hand held scanner BCS3600ex series Quick Start Guide...
Page 2: ......
Page 4: ......
Page 75: ......
