Bartec BCS3600ex Series, Quick Start Manual

Page: 48 / 76

Commissioning
BCS3600
ex
series
Hand-held scanner and accessories
42/68
Subject to technical changes.
March 2021 / Revision B
4. Connect the base station to the power source.
Connection via USB Connection via RS232
Needed power supply:
Part
BCS3678
ex
-IS
ATEX / IECEx Zone 1/21
BCS3678
ex
-NI
ATEX / IECEx Zone 2/22
NEC Class I, II, III Division 2
Base station
for hand-held scanner
BCS3678
ex
Bluetooth
Type: 17-A1Z0-0014 Type: G7-A0Z0-0010
Connecting cable

Connection between
base station and PC

With terminal for 12V
power supply
RS232; 1.9 m (plain)
 Type: 17-A1Z0-0026
RS232; 4.5 m (plain)
 Type: 17-A1Z0-0027
USB; 1.9 m (plain)
 Type: 17-A1Z0-0020
Identical with
programming cable
RS232; 2 m (plain)

Type: G7-A0Z0-0014
RS232; 4.6 m (plain)

Type: G7-A0Z0-0015
RS232; 2.8 m (spiral)

Type: G7-A0Z0-0016
USB; 2 m (plain)

Type: G7-A0Z0-0018
Power supply with
DC connecting cable
Type: G7-A0Z0-0019
Note on the power supply of the base station via the PC/Host:
RS232:
The RS232 does not provide a supply voltage to operate the base station functionally.
External power supply of type G7-A0Z0-0019 is mandatory.
USB:
The supply voltage via the USB interface is not sufficient to use a base station for data
transmission and as a charging station.
It is absolutely necessary to use an external power supply (type G7-A0Z0-0019).
The charging current via the USB interface is too low to enable charging of the battery.
Non ex-area
Non ex-area