BCS3600
ex
series
Hand-held scanner and accessories
Operation
Subject to technical changes.
March 2021 / Revision B
57/68
7.3
Scanning
During scanning, the hand-held scanners in the BCS3600
ex
series emit a scanner beam.
1.
To scan a barcode, direct the scanner beam onto the barcode so that it captures the
whole width of the barcode. While doing so, pay attention to the optimal scan position.
2.
Align the hand-held scanner centrally on the barcode.
3.
Press the trigger button.
White LEDs on the hand-held scanner are switched on to illuminate the barcode.
Scanner emits a beep to signalise the successful decoding of the barcode.
Right:
The hand-held scanner can also read barcodes when the scanner beam is not directly
centred on the barcode.
Wrong:
The hand-held scanner cannot decode/scan a barcode if the scanner beam does not
capture the whole width of the barcode.
Due to the Ex modifications, deviations in the positioning of the scanner beam are
possible with the BCS36*8
ex
-IS.
Summary of Contents for BCS3600ex Series
Page 1: ...Hand held scanner BCS3600ex series Quick Start Guide...
Page 2: ......
Page 4: ......
Page 75: ......
