Transport and storage
Ex p relay
Power
Page 14 of 24
Rev. 0
20190910_Manual_Exp-Relais_Power_en.docx
4
Transport and storage
Scope of delivery
Missing parts or damage must be reported immediately in writing
to the forwarding agent, the insurance company or BARTEC
GmbH.
Check the completeness of the scope of delivery using the delivery note
As standard, each Ex p relay unit is delivered with the following scope of delivery:
Ex p power relay in the ordered version
Operating instructions
Packaging
The Ex p power relay is delivered packed in film, on pallets and/or in boxes.
Dispose of the packaging materials at the designated disposal points.
Observe the applicable national regulations for disposal.
Transport
WARNING
DEATH OR RISK OF INJURY FROM FALLING HEAVY SUSPENDED LOADS.
Never stand under suspended loads.
Secure the Ex p power relay before transport using suitable fastening
(e.g. straps)
ATTENTION
AVOID HARD IMPACTS, E.G. BY FALLING DOWN OR SETTING DOWN TOO
VIGOROUSLY.
The Ex p control unit may be damaged.
Only use hoists and load handling attachments with sufficient load
bearing capacity.
The permissible lifting weight of a lifting device may not be exceeded.
Slowly set down the control unit.
Observe the weight of the goods to be transported and select an adequate
transport device.
Storage
Store the Ex p relay in a horizontal position and at a temperature of -25 °C to +65
°C in its original packaging. The environment must be dry, dust-free and low
vibration.
Store the control unit for a maximum of 2 years.
For warehouse logistics, we recommend the “first in – first out” principle.
