TAP100/200 User Guide R.5.3 2019
6
|
P a g e
B
EFORE
G
ETTING
S
TARTED
Before you get started using your Tyre Tool, there are a few items to be aware of.
Charge your tool
The tool is shipped with a fully charged battery, but due to shelf drain it may require charging. It is
recommended to charge your tool 2+ hours before use.
(See page 10 for charging instructions)
Register your tool
You can register your Bartec tool at www.bartecautoid.com. Follow the on-screen prompts filling in your
information and tool serial number. A valid serial number and supplier is required to process your registration,
which can take up to 24hrs once submitted.
(See page 16 for instructions)
Update your Tool
Once your tool is registered, verify the software level loaded to the level available online and update your tool
if necessary. Refer to section on tool updating for further instruction.
(See page 19 for update instructions)
Calibration depth and pressure
We recommend you carry out a monthly calibration of the depth gauge to ensure your tool functions
accurately. (Please use the setup menu and follow the displayed instructions)
We recommend you arrange for Pressure calibration annually. For further help please contact:
