TAP100/200 User Guide R.5.3 2019
5
|
P a g e
Disposing of equipment
•
Do not dispose of this equipment as miscellaneous solid waste but arrange to have collected
separately.
•
The re-use or correct recycling of electronic equipment (EEE) is important in order to protect the
environment and human health.
•
In accordance with European Directive WEEE 2002/96/EC, special disposal points are available for
waste electrical and electronic equipment.
•
Public administrators and producers of electrical and electronic equipment are involved in facilitating
the re-use and recovery of waste electrical and electronic equipment through these collection
activities and use of appropriate planning arrangements.
•
Unauthorised disposal of waste electrical and electronic equipment is punishable by law with
appropriate penalties.
Disposing of batteries
•
The TAP100 and the TAP200 contain a Lithium Polymer rechargeable battery which is not accessible
to the user.
•
Batteries must be recycled or disposed of properly. Do not throw batteries away as part of normal
refuse disposal.
•
Do no throw batteries on to an open fire
Correct use of the tool
•
Do not expose the tool to excessive moisture.
•
Do not use the tool near sources of heat or polluting emissions (stoves, ovens, etc.).
•
Do not drop the tool.
•
Do not allow the tool to come into contact with water or other liquids.
•
Do not open the tool or attempt to perform maintenance or repair operations on any internal parts.
•
You are advised to keep the packaging and to re-use it if the tool is moved to another site.
When using the tool remember:
•
Do not subject the tool to magnetic or electric interference.
Reception, maintenance and guarantee:
Inspect the tool when delivered. Damage sustained during shipment is not covered by the guarantee. Bartec will
accept no responsibility for material or bodily harm resulting from inappropriate use of the product, failure to
maintain it, or incorrect storage conditions.
Bartec provides training for clients desirous of acquiring the knowledge required for the correct use of its products.
Only personnel authorized by Bartec are permitted to make any repairs that may be necessary. This tool is
guaranteed against any manufacturing fault for 12 months as of date of invoice (parts and labour) only if product
has been correctly used. Serial number must stay readable and proof of purchase must be retained for presentation
upon request.
Bartec Auto ID Ltd
Unit 9
Redbrook Business Park
Wilthorpe Road
Barnsley
S75 1JN
+44 (0) 1226 770581
