TAP100/200 User Guide R.5.3 2019
9
|
P a g e
T
OOL
P
OSITIONING
Proper tool positioning is important to insure correct measurement of tyre data. Place the tool on the tyre,
use the pin on the back side of the tool for measuring tyre tread depth and connect the hose to the valve in
order to check tyre pressure.
Tread Depth and Pressure Measurement
Tread Depth
To check the tyre’s tread depth, hold the pin on the backside of the tool in each groove, press to the bottom
and wait for the tool’s signal.
Pressure
In order to measure tyre pressure, connect the hose to the valve of the wheel and wait for the tool’s signal.
MOT Testing
When using the tool for UK MOT Testing please follow the testing procedures and pass/fail limits that are
laid out in Section 4 of the relevant DVSA MOT Inspection Manual.
T
OOL
C
ONNECTIONS
Hose connection
for tyre pressure measurement.
