9
WWW.BARTCLEAN.COM
Machine Maintenance
Only by indeed following daily, weekly and monthly maintenance procedure can the
machine be kept in the optimum working state.
Warning: Electric shock hazard. Please firstly disconnect the battery wring before
maintaining the machine.
Daily Maintenance (after each use)
1. Drain and clean the waste water tank
2. Dismantle and flush the floating filter screen in the waste water tank
3. Drain the clean water tank and flush the water tank with hot water of no higher than
60°C as required
4. Dismantle the scouring pad/brush for cleaning. If there is any abrasion, overturn or
replace the scouring pad
5. Wipe the squeegee blades. Place the squeegee component in the rising position to
avoid damage to squeegee blades.
6. Check the abrasion conditions of the scraper edge of the squeegee blades. If there is
any wear and tear, exchange two sides of the adhesive tape.
7. Use multi-purpose detergent and wet cloth to wipe the machine.
For safety: please do not spray this machine with high pressure or flush this machine
with water pipe when cleaning the machine to avoid failure of electronic component.
8. Check the abrasion conditions of the skirt side of the brush head and replace it if
there is any wear and tear or damage.
9. Charge the battery. To prolong the life of the battery and ensure the optimum effi
-
ciency of the machine, the battery must be charged after the use time of the machine
exceeds 30min.
Monthly Maintenance (every 80 hours)
1. Dismantle the filter of the clean water tank from the bottom of the machine and
clean the filter screen. Ensure the clean water tank is emptied before dismantling the
filter.
2. Clean the top of the battery to prevent electrode corrosion (refer to [Battery Mainte-
nance]).
