5
WWW.BARTCLEAN.COM
Soft nylon brush (white) - It is suggested to clean the coated floor without damaging
the floor. Clean without scratches.
Polishing pad (white) - It is used for maintaining highly smooth or polished floor.
Red - It is used for scrubbing slight dirt without damaging the floor.
Black
- It is used for powerfully removing the heavy coating or base or super-powerful
scrubbing.
Machine Installation
Installation and Connection of Squeegee Component
1. Stop and place the machine on the level ground and take out the key.
2. Lower the lifting rod of the squeegee to the lower position.
3. Install the squeegee to the squee-
gee installation bracket as shown in
the figure. Ensure to fully place the
fastening knob into the jack and then
tighten the knob.
4. Connect the vacuum suction pipe
to the squeegee component.
5. Examine the squeegee adhesive
tape and reasonably adjust.
Installation of Brush/Scouring Pad
Explanation:
As for the brush and scouring pad suggested for use, please refer to the
section of [Information on Brush and Scouring Pad] in this Guide or consult your local
authorized dealer.
1. Stop and place the machine on the level ground and take out the key.
2. Step on the brush head lifting pedal to lift up the brush head from the ground.
3. Place the scouring pad on the holder and then install the drive disc. Fasten the cen-
tral lock to fix the scouring pad.
4. Align the holder/brush installation stud at the motor drive disc buckle and press the
motor switch of the brush.
5. If the holder and brush are to be dismantled, step on the brush head lifting pedal to
lift up the brush head from the ground, press the motor switch of the brush.
