![background image](http://html1.mh-extra.com/html/bart/bar100-20bd/bar100-20bd_owners-manual_3943397008.webp)
6
BAR100-20BD | OWNER’S GUIDE
Machine Operation
For safety: Please do not operate this machine before reading and understanding the
operation manual.
Warning: fire or explosion hazard. Do not operate the machine
close to or in the place where there is flammable liquid, air or dust.
Pre-operational Examination
• Clean the dust on the ground.
• Check the scale of the battery meter.
• Check the abrasion conditions of the scouring pad/brush.
• Check the abrasion conditions of the squeegee adhesive tape and reasonably adjust
the angle.
• Confirm that the waste water tank is empty and has been equipped with clean
floating filter screen.
• Check the abrasion conditions of the skirt section of the brush head.
1. Switch the key of the main power supply to the position of (I).
2. Pull down the squeegee lifting rod to lower the squeegee component to the ground.
3. Step on the brush head lifting pedal to lower the brush head to the ground.
4. Switch on the clean water control knob.
5. Press the motor switch of the brush and press the switch of water suction motor.
6. Motor drive model: adjust the speed control knob to the cleaning speed required by
you.
Explanation:
It is suggested to use the cleaning speed of 45-60 meters/min.
Machine Operation Duration
Warning: fire or explosion hazard. Please do not pick up flammable materials or
reactive metals.
1. Each cleaning path overlaps by 5cm.
2. Let the machine advance constantly to avoid ground damage.
3. If there is drag mark on the ground after the squeegee absorbs water, remove the
waste with duster cloth. Clean in advance to prevent drag mark.
4. Do not operate the machine on the slope with a slope over 5% (3°).
5. If there is too much foam, it is suggested to pour defoamer solution into the waste
water tank.