Barry-Wehmiller Streamfeeder V-710IJ, Manual

Page: 12 / 58

6 V
alue
S
erieS
V-710iJ M
anual
1. Loosen locking knobs at both side guides (Figure 2-1).
2. Slide each side guide to the outermost position. Do not lock in
place.
1. Loosen each of the setscrews at the two shaft housing assem -
blies A and B (Figure 2-2).
2. Slide shaft end closest to the vacuum base gate out of housing
A (with jogging plate/hopper guides still attached). Slide shaft
back far enough on housing B to allow removal of jogging
plate/hopper guides.
3. Loosen locking knob and slide jogging plate/back hopper
guide off of shaft and away from the surface of the vacuum
base.
4. Return shaft end to housing B. Lock setscrews in both housing
assemblies.
STEP 2:
Removing Back Jogging
Plate/Back Hopper Guide
STEP 1:
Repositioning Front
Side Guides
Figure 2-1. Front Side Guides Being Repositioned
Figure 2-2. Back Jogging Plate/Back Hopper Guide Removal
Front side
guides
Locking
knob
A
B
Locking knob