RDG603A11 - Issue 10 - Shire 14 85, 130 WB Owners
Manual Page 41 of 52
13.
Deluxe Panel Maintenance
CAUTION:
TURN BATTERY ISOLATION SWITCHES OFF
REMOVE THE IGNITION KEY BEFORE WORKING IN ENGINE COMPARTMENT.
Warning Light Bulb replacement
Release the panel from its mounting
1. To replace an illumination bulb.
a. The bulbs are accessible from the rear of the panel. This can be gently
removed by pulling off the wires, unscrewing the nut and pulling out the bulb
housing from the panel.
2. To replace any gauge
a. The gauges are accessible from rear of the panel. Unplug the wire
connectors, unscrew and pull the gauge out from the panel.
3. Periodically squirt a lubricant in to the key switch slot with key removed (a lubricant
such as WD40
–
with silicon, other lubricants are available). Then with the battery
master switch turned off operate key switch a couple of times to ensure lubricant
works in to mechanism.
14. Sacrificial Anode Change
•
The anode is located in the larger Bowman Heat Exchanger on the rail with a
“Zinc” Anode st
icker on it
–
NOT
on the smaller one.
•
The Anode is replaced with part number RDG5048313, using Pipe Thread
Sealant (e.g. Tonsan 1567 or Bondloc 572).
Summary of Contents for SHIRE 14 85 WB
Page 45: ...SECTION 8 Wiring Diagrams...
