RDG603A11 - Issue 10 - Shire 14 85, 130 WB Owners
Manual Page 21 of 52
14.
Coolant
WARNING:
SCALD HAZARD!
NEVER REMOVE THE COOLANT BOTTLE CAP IF THE ENGINE
IS HOT. STEAM AND HOT COOLANT WILL SPURT OUT AND CAUSE INJURY.
TIGHTEN THE CAP SECURELY AFTER BEING REMOVED. STEAM CAN SPURT
OUT DURING ENGINE OPERATION IF THE CAP IS LOOSE.
WARNING:
BURN HAZARD!
WAIT UNTIL THE ENGINE COOLS BEFORE YOU DRAIN THE
ENGINE COOLANT. HOT ENGINE COOLANT MAY SPLASH AND BURN YOU.
•
John Deere (Shire 14 85/130 WB) recommends that CoolGuard II be used, part
number VC76215-020, available from Barrus
.
•
For more information, see the John Deere Operators Manual.
•
Do not mix Ethylene Glycol and Propylene Coolants.
•
To fill the cooling system for the first time, add coolant to the engine through the
white plastic expansion bottle.
•
Open the calorifier taps (where fitted) to fill the calorifier system and displace air.
•
Do not use antifreeze that contains sealing additives or cooling system sealing
additives.
•
Do not use coolants that contain nitrites.
Summary of Contents for SHIRE 14 85 WB
Page 45: ...SECTION 8 Wiring Diagrams...