RDG603A11 - Issue 10 - Shire 14 85, 130 WB Owners
Manual Page 40 of 52
12.
Belt Replacement
CAUTION:
REMOVE THE IGNITION KEY BEFORE WORKING IN ENGINE COMPARTMENT.
WARNING:
SEVERE HAZARD!
KEEP HANDS AND OTHER BODY PARTS AWAY FROM
MOVING/ROTATING PARTS. WEAR TIGHT FITTING CLOTHING AND KEEP YOUR
HAIR SHORT OR TIE BACK. REMOVE ALL JEWELLERY BEFORE COMMENCING
WORK. CHECK BEFORE STARTING THE ENGINE THAT ANY TOOLS OR RAGS
USED DURING MAINTENANCE HAVE BEEN REMOVED FROM THE AREA.
Shire 14 85 & 130 WB
•
Insert a ½” drive ‘T’ bar into the highlighted square area of the automatic tensioner.
•
Pull lever bar in anti-clockwise direction to slacken off the belt.
•
Remove belt.
•
Pull lever bar anti-clockwise again and re-fit belt.
•
Check that the belt is fitted correctly into all of the pulley grooves.
•
Note
: the tensioner brace bar will need to be removed before the old belt can be
removed, and then replaced after the new belt has been fitted.
120 Amp Alternator
Auto
Adjuster
Summary of Contents for SHIRE 14 85 WB
Page 45: ...SECTION 8 Wiring Diagrams...
