38
Operational parameters
Selecting Channel Scan on Power-up
Factory Default: On
The normal operation of the interconnect requires that a number of channel frequencies be scanned for incoming
calls. The channels only programmed as “Scan” will be scanned (See ‘Adding / Editing a Channel’). Enabling scan
mode here will place the interconnect into scan mode and will also save this option.
Select “Scan on Powerup” from the “Operational Menu”.
Use the ‘LEFT’ and ‘RIGHT’ arrow keys to select “On” or “Off”. Press ‘END’ to confirm selection.
Selecting Automatic Mode on Power-up
Factory Default: Auto
The normal automatic operation of the interconnect means that any incoming phone calls will be automatically
answered and any received Selcalls, Telcalls or beacons will be automatically processed.
Select “Auto on Powerup” from the “Operational Menu”.
Use ‘LEFT’ and ‘RIGHT’ arrow keys to select “Auto” or “Manual”. Press ‘END’ to confirm selection.
Enabling Automatic VOX
Factory Default: Auto
'Automatic' VOX control removes the need for the telephone user to have to think about what is happening.
Whenever they say something, the transceiver is automatically switched to transmit. Whenever they stop or pause
for a while, it switches back to receive.
Select “Automatic VOX” from the “Operational Menu”.
