![Barrett 900 Series Programming Software Manual Download Page 27](http://html1.mh-extra.com/html/barrett/900-series/900-series_programming-software-manual_3929116027.webp)
BARRETT 900 SERIES PROGRAMING SOFTWARE
At this point in the transceiver programming software Main screen select the Transceiver
Menu, then select “Receive” and push any key on the transceiver. As the data is transferred
the following will be indicated:-
If the transfer of programming information is unsuccessful the transceiver will display the
following:-
If this is the case the cable connection should be checked and the programming procedure
repeated.
If a transceiver has been locked by a security lock selcall sequence connect the transceiver
to the PC loaded with the programming software as described in section 4.0. Select the
menu in the transceiver programming software, then select
.
The transceiver will now be unlocked
7.0
Unlocking locked (killed) transceivers
Transceiver
Unlock
PAGE 27
Summary of Contents for 900 Series
Page 30: ......