BARRETT 900 SERIES PROGRAMING SOFTWARE
PAGE 16
3.4.2
Channel Parameters
To edit the channels, go to the channels tab in the configuration dialog box. Press “+” to add
another channel, and press “-“ to delete the currently selected channel. Press Edit to edit the
currently selected channel. The fields in this section can be entered or edited by pointing
and clicking in the field with your mouse or by using the TAB key.
A dialog box with the following options is displayed;
This field is for the channel number. The channel number must be in the range 1 to 9999
inclusive for 950's, 980's and 940's and 1 to 20 inclusive for 930's . All channels are sorted
in ascending channel number order. When the channel is saved the channel number is
checked to make sure the channel does not already exist.
This field is for the channels receive and transmit frequency. The frequency should be
entered in kHz. When the Rx frequency is entered it’s value is automatically entered into the
Tx frequency field.
3.4.2.1
Channel Number
3.4.2.2
RX/TX Frequency
Summary of Contents for 900 Series
Page 30: ......
