Barrett 900 Series, Programming Software Manual

Page: 14 / 30

BARRETT 900 SERIES PROGRAMING SOFTWARE
3.4.1.4 Scanning
ALE Scan
Scan 1
Scan 2
Scan 1 & 2
3.4.1.5 Ext Alarm
Pulsed
Latched
3.4.1.6 Clarifier Options
No clarifier
50Hz Limit
150Hz Limit
1kHz Limit
This option is used to select the active scan table after configuration:-
This option is used to select the ALE to control the scanning of the 900 transceiver.
This option is used to select scan table 1 as the currently active table.
This option is used to select scan table 2 as the currently active table.
This option is used to select scan table 1 and 2 as the currently active tables.
An external alarm is generated when a selcall is received. This option sets the nature of the
alarm.
Note:- Only available on 930 or 950 transceivers.
A pulsed alarm is generated on the alarm output line of the auxiliary connector.
A latched (continuous) alarm is generated on the alarm output line of the auxiliary connector.
This option sets the limit for the clarifier on land type channels. Marine and Selcall channels
have fixed clarifier limits of 150Hz and no
respectively.
This option prevents any non-marine channels from being clarified.
This option limits any non-marine or non selcall channels to have a clarifier limit of 50Hz.
This option limits any non-marine channels to have a clarifier limit of 150Hz.
This option limits any non-marine channels to have a clarifier limit of 1kHz.
clarifier
or non selcall
or non selcall
PAGE 14