42
BARRETT 4050 HF SDR TRANSCEIVER - OPERATING AND INSTALLATION MANUAL
Hangup
When a call to a telephone interconnect base station has completed or a secure
call link is complete, the Operator should ‘hang-up’ by sending a hang-up code
to a telephone interconnect.
Note: If the hang up call is unsuccessful for any reason, the telephone interconnect
will time out and hang-up automatically.
Press
and if necessary tap
to display the Manual Call screen.
Tap
Hangup
to display the Selcall ID
screen.
Use the keyboard to type the Selcall
ID, then tap
Enter
or press
When the hang-up Selcall has com-
pleted transmitting, listen for hang-
XSUHYHUWLYHWRQHZKLFKFRQÀUPVWKDW
the hang-up was successful.
When hanging up a telephone in-
terconnect call, the hang-up process
may be repeated until a revertive
tone is heard.
If the hang-up call is unsuccessful
when ending a secure call, only the
Transceiver that sent the hang-up call
will exit secure mode. Repeating the
hang-up call will not hang-up the
remote end.
Summary of Contents for 4050 HF SDR
Page 218: ......
