Barreto 1324TK, Owner'S Manual

Page: 11 / 22

1324TK - 1624TK OWNER’S MANUAL 12/4/14 Page
11
of
22
TRACK DRIVE NEUTRAL ADJUSTMENT
The speed control cables may need to be adjusted after some use. If the machine creeps while the T-
handle control is in neutral, or if the left and right tracks move at different speeds, the speed cables
will need adjustment.
Adjust the cables to bring the pump cable arms to the neutral position (vertical) when the T-handle
control is in neutral.
Adjust the cables to eliminate slack, but do not over tighten them so they are extremely tight against
each other. The front pump drives the right track, and rear pump drives left track.
The control cables should be adjusted so both tracks are in neutral or move at same speed. Check by
starting engine and activating clutch lever with T-handle control in neutral. Adjust cables so both
tracks are stationary or creep at same speed.