12
CARRIAGE FEED ENGAGE/DISENGAGEMENT
Lever operated clutch system using silicon bronze shoe with block (adjustable set screws).
INDEXING OR ROCK CUT WIDTH CONTROL
Crank handle operated stainless steel screw system.
TANK & HOOD COVER CONSTRUCTION
11 gauge steel box-construction 12 gauge hood with acrylic plastic viewing window.
TANK LEGS
11 gauge steel construction with locking casters on slab saws.
OIL SLUDGE DRAIN
2" drain cap on HP18-24 saw. Drain placement is on bottom of saw tank.
ON/OFF AUTOMATIC POWER CONTROL
HP18-24 saw has adjustable chain for automatic shut-off control of power on/off switch.
DEPTH OF CUT
18" blade: 6.5 inches, 20" blade: 7.5 inches & 24" blade: 9.5 inches
MATERIAL TYPES
Barranca Diamond HP18-24 Slab Saw can cut a variety of material types including lapidary rock, natu-
ral and artificial glass, and gemstone minerals.
NOTE: HP18-24 Slab Saw is not designed to cut wood, ice, synthetics, graphite carbon, plastics, or
ferrous metal materials.
UNPACKING & ASSEMBLY
Your HP18-24 Slab Saw has been shipped from the factory thoroughly inspected and tested. The
blade has been factory installed and arbor nut securely tightened. No assembly is required. Do not
over-tighten the arbor nut prior to use.
Remove the saw from the pallet by unbolting legs from crate pallet and place it on a flat surface using
a forklift. Install casters on legs – one at a time - on slab saws prior to operation.
HP18-24 SLAB SAW
SPECIFICATION
