11
Model#
HP18-24
Motor
Electric
Horsepower
1.5 Hp
Voltage
120V / 60 Hz
Amperage
14.4
Motor RPM
1725
Blade RPM
500
Arbor Size
1"
Blade Capacity
18"
20"
24"
Depth of Cut
6.5"
7.5"
9.5"
Oil Capacity
23 gal.* 23 gal.*
15 gal.
Vise Opening
18"
Saw L x W x H
65" x 37" x 48"
Dry Weight
720 lbs.
Part Number
8302024
MOTOR
Single Phase, Continuous Duty commercial grade motor with automatic thermal overload protection.
Manual reset button on HP18-24 motor. Export motor 230 volts 50Hz can be ordered with either saw.
FEED MECHANISM
Stainless steel screw rod with silicon bronze threaded clutch block engagement system. Silicon bronze
spur to hardened steel worm gear to belt pulley drive.
LUBRICATING SYSTEM
Blade splash system using petroleum or mineral oil based lubricant. Water should NEVER be used as
a lubricant in any of the series saws as it will adversely affect cutting performance, blade life, power
feed, iron/steel components, and create bearing problems with the saw.
HP18-24 SLAB SAW
SPECIFICATION
LUBRICANT REFERENCE
HP18-24: 23 gallons with 18"-20" blade, 15 gallons with 24" blade.
Refer to Oil / Coolant page 13
CARRIAGE & VISE MATERIAL
Cast Iron.
CARRIAGE RAILS
Steel rod.
SHAFT BEARINGS
Sealed flange mount ball bearings with zerk fittings for grease lubrication.
NOTE:
Submersible pump (not included with saw) required when using 18" and 20" blades.
Pump kit part# 172897.
*Oil capacity for HP18 & HP20 with pump
