Barracuda Control Server, Administrator'S Manual

Page: 14 / 49

14 Barracuda Control Server Administrator’s Guide
3c.
If the Barracuda Control Server is behind a proxy server, enter the proxy server IP
address and port number, and if required, enter the proxy server username and password
in the
Proxy Server Configuration section.
3d.
Enter the default domain name of the Barracuda Control Server in the Domain
Configuration section.
Click Save Changes .
Configure SNMP Access
You can configure SNMP access between the Barracuda Control Server and an SNMP monitor or
other program used to query for system information on the
CLOUD CONTROL > Administration
page.
Front Panel Indicator Lights
The Barracuda Control Server has five indicator lights on the front panel that blink when the system
processes any message.
Figure 2.1 displays the location of each of the lights.
Figure 2.1: Barracuda Control Server front panel indicator lights
Connect to the Barracuda Control Server
You can connect one or more Barracuda Networks products to a Barracuda Control Server by doing
the following:
1.
Log into the Barracuda Control Server web interface as the Barracuda Control Server Account
Admin .
2.
The
CLOUD CONTROL > Status
page displays, including a message indicating that no products
are connected.
3.
Go to the
CLOUD > Connect Products
page, and copy the Validation Token .
4.
In another browser window, log into the product you wish to connect to the Barracuda Control
Server as the administrator. From the product
ADVANCED > Firmware Upgrade
page, check to
Note
Whenever your Barracuda Control Server IP address is changed on the
IP Configuration
page, you are disconnected from the administration interface. You must log in again using
the new IP address.