It will take a while for the supplied engine oil
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after supplying the oil.
Fuel
Inspection of Fuel Quantity
With the machine on a level surface, observe
the fuel gauge on the fuel tank to check the
fuel level.
1
guc5f6-007
Inspection of Fuel Quantity_001
1
Fuel gauge
Fuel Supply
Warning
Supply fuel before starting the engine.
Never remove the tank cap or supply fuel
while the engine is running.
When opening the tank cap, wait at least 1
minute after stopping the engine, and then
slowly open the cap to release the pressure in
the tank.
Opening the tank cap quickly may cause fuel
to burst out.
Warning
Do not supply fuel above FULL level of the
fuel gauge.
If you supply too much fuel, it might overflow
from the fuel cap when you travel or work on a
slope.
Warning
Keep fire away while refueling.
Do not smoke while refueling.
4.
Warning
Supply fuel after the engine is stopped and
has well cooled down.
If the fuel gauge located on the fuel tank
indicates a level close to E (EMPTY), supply
gasoline at your earliest convenience.
1
guc5f6-004
Fuel Supply_001
1
Fuel gauge
The fuel tank capacity up to the red ring of
strainer is approximately 15.0 dm
3
(15.0 L).
1
2
2e4emp-017
Fuel Supply_002
1
Strainer
2
Red ring
Fuel Filter
Inspection of Fuel Filter
The fuel filter works to remove foreign objects
mixed into the fuel.
When the fuel flow becomes insufficient,
replace the fuel filter if necessary.
Make sure that there is no fuel leakage.
Make sure that the fuel filter is not damaged
or dirty.
1.
2.
Handling Instructions
SP05A
Handling Instructions
Page 4-9
Inspections
Summary of Contents for SP05A
