Baroness SP05A, Owner'S Operating Manual

Page: 27 / 76

Tire
Inspection of Tires
Check the pneumatic pressure of the tires.
Make sure that there are no cracks,
damage or abnormal wear.
Tire size Pneumatic pressure
Front wheel (PD21 x
11.00 - 10)
70 kPa (0.7 kgf/cm
2
)
Rear wheel (25 x 13.00
- 9)
40 kPa (0.4 kgf/cm
2
)
Brake
Inspection of Brake
While traveling, depress the brake pedal
firmly to make sure that the brake is applied
effectively.
Inspection of Parking Brake
Depress the locking pedal while firmly
depressing the brake pedal to lock it and
check that the brake is applied effectively.
Firmly depress the brake pedal and release
the locking pedal to release the brake
pedal, and then check that the brake is not
applied.
Belt
Inspection of Belt
Caution
The engine must be stopped when the belt is
inspected.
Be careful since the belt may rotate and
something may get caught in it, even if the
engine is stopped.
Caution
The engine muffler is near the belt.
Inspect the belt after the muffler has
sufficiently cooled.
Press the middle of the belt with your finger
to check the belt tension.
Make sure that there are no cracks,
damage or abnormal wear.
1.
2.
1.
2.
1.
2.
Wire
Inspection of Wire
Make sure that the wire is not cracked or
damaged.
If the wire is cracked or damaged, replace it
with a new one immediately.
Steering Wheel
Inspection of Steering Wheel
Make sure that there is no play in the
steering wheel.
Make sure that the steering wheel can be
turned smoothly without abnormal noise,
etc.
Make sure that the steering chain is not
overtightened and is not loose.
Make sure that there are no cracks,
damage or abnormal wear in the steering
chain.
Around The Engine
Inspection of Engine-Associated Parts
Check the fuel system parts for loosened or
cracked joints and leakage. Replace the
parts if necessary.
Blow compressed air to clean any grass or
flammable materials that may be attached
on or around the muffler.
1.
2.
1.
2.
3.
4.
1.
2.
Handling Instructions
SP05A
Handling Instructions
Page 4-7
Inspections