Baroness SP05A, Owner'S Operating Manual

Page: 22 / 76

Inspections
Inspect the machine according to the
maintenance schedule so that you will be able to
take advantage of its optimum performance for a
long period of time.
Rake
Inspection of Rake
Due to frequent use or damage caused during
use or transportation, tracks, such as from
tires, may remain after use.
Inspect, and if necessary, repair or replace.
Make sure that the rake pipe is not bent.
Make sure that the cross-link chain is not
twisted or worn.
Make sure that the rake shaft is not worn.
Make sure that the center shaft of the
fulcrum swing fitting is not worn.
Make sure that a spring pin is not missing
from the rake shaft.
Make sure that a hardened flat-head pin on
the rake hanging arm is not worn.
Make sure that the plate springs are not
cracked or bent.
Make sure that a spring pin is not missing
from the rake fulcrum fitting.
Make sure that the rake mounting bracket is
not bent.
Make sure that the smoother plate is not
bent, cracked or unevenly worn.
Make sure that the warp board is not bent,
cracked or worn.
Make sure that the fork prong bar is not
bent or worn.
Blade
Inspection of Blade
Note:
Depending on the specifications, this function
may not be available.
Due to frequent use or damage caused during
use or transportation, it may become difficult
to move sand around.
Inspect, and if necessary, repair or replace.
Make sure that the spring pin is not missing
from the lever arm.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
1.
1
bvrjiz-001
Inspection of Blade_001
1 Spring pin
Make sure that the connecting shaft is not
bent.
Make sure that the hook spring is not bent
or stretched.
Make sure that a delta pin is not missing.
Make sure that the small blade is not bent,
cracked or worn.
3
4
2
1
bvrjiz-002
Inspection of Blade_002
1 Connecting shaft
2 Hook spring
3 Delta pin
4 Small blade
2.
3.
4.
5.
SP05A
Handling Instructions
Page 4-2
Inspections