Thermo-Start Lamp
The thermo-start lamp is the middle pilot lamp
located in the operation panel.
When the ignition key is set to the "GLOW"
position, it illuminates as the glow plug
generates heat.
Illumination of the thermo-start lamp is
controlled by the glow lamp timer, and the
lamp is turned off after a specified amount of
time passes.
The duration of illumination indicates an
approximate period of time required for warm-
up, and has been fixed at five seconds.
1
q44uug-002
Thermo-Start Lamp_001
1
Thermo-start lamp
Oil Pressure Lamp
The oil pressure lamp is the right pilot lamp
located in the operation panel.
It turns on when the ignition key is set to the
"ON" position before the engine starts. It turns
off when the engine starts and engine oil
pressure is generated properly.
If this lamp illuminates while you are operating
the machine, stop the engine immediately,
and then inspect the machine and perform
any necessary maintenance.
1
1ldikn-002
Oil Pressure Lamp_001
1
Oil pressure lamp
Fuel Gauge
The fuel gauge is located on the fuel tank.
This instrument indicates the quantity of fuel
inside the fuel tank.
1
96ltfa-004
Fuel Gauge_001
1
Fuel gauge
Safety Mechanisms
This machine features a safety device for
starting/stopping the engine.
As for starting the engine, the safety device
prevents the engine from starting unless it
meets each of the following four conditions.
An operator is sitting on the seat.
The parking brake is applied.
The reel rotation switch is set to the "Stop"
position.
The traveling pedal is set to the neutral
position.
When the operator leaves the seat with the
parking brake not applied and the engine
running, the safety device will be activated
and will stop the engine.
When the operator leaves the seat with the
parking brake applied and the engine running,
the safety device will be activated and will
stop the engine under any of the following
conditions:
The traveling pedal is not set to the neutral
position. (The operator has depressed the
traveling pedal.)
Reel rotation switch is set to the "Rotation"
position.
However, when the reel forward/reverse
switch is set to the "On (Reverse)" position,
engine will not stop.
1.
･
･
･
･
2.
3.
･
･
LM311
Description of Functions
Page 4-10
Fuel Gauge
