−41−
13. Cautions for maintenance
Caution
13-1 Cautions for maintenance
●
Read this manual carefully and have full knowledge of the
maintenance procedure.
●
Stay the machine on a flat, clean and dried place.
●
Never lubricate or maintenance when the machine is in motion.
●
Keep hands, feet away from drive/moving parts.
For the maintenance of drive/moving parts, be sure to exercise
caution lest hands and feet should be caught up.
●
Disengage all the drives, operate each control and release
pressure.
●
Use correct/appropriate parts in good condition.
●
Repair or replace worn or damaged parts immediately.
●
Do not modify any mechanical equipments/parts. Use Baroness
genuine parts required for maintenance for safety.
●
Clean up grass and debris, oil/grease or fuel spillage.
●
Make sure to disconnect the negative (-) battery cable before
maintaining the electric circuit.
●
When you maintain with the machine raised, carry out the safe
support securely.
●
Please dispose in accordance with the local law about disposal
of waste oil and unnecessary replacement parts.
Warning
13-2 Prevention of the damage caused by high-
pressure oil
●
When high pressure oil is injected to the skin, get seriously
injured.
●
Eliminate the pressure before removing the high-pressure line,
hose and coupling.
●
When maintain the hydraulic part, lower the mowers in advance.
●
Check all the joint fastenings before operating the machine.
●
Use the paper or cardboard for the test of oil leak. If hydraulic oil
is injected into the skin, be sure to have medical treatment by
doctor within 2 to 3 hours.
Maintenance
Before
use
Every
50hrs
Every
100hrs
Every
200hrs
Every
500hrs
Every 6
months
Engine
Inspection of engine oil
○
Change of engine oil
○
(Initial
operation)
○
Replacement of oil filter
○
(Initial
operation)
○
Cleaning of radiator and oil
cooler
○
Inspection of coolant
○
Inspection and cleaning of
air filter
○
Replacement of air filter
element
○
Inspection of fan belt
○
Inspection of battery
electrolyte
○
Replacement of fuel filter
○
Main body
Inspection of tires
○
Inspection of fuel
○
Inspection of hydraulic oil
○
Replacement of hydraulic oil
○
(Initial
operation)
○
Replacement of oil filter
○
(Initial
operation)
○
Inspection of brake
○
Oil leakage of each part
○
Inspection of slack or
damageon each part
○
Grease up (main unit and
mower) (Refer to 11-4 12-1 )
○
(partially
every 10hrs)
Inspection of grease in the
hydraulic motor housing
○
Contact condition of the
blades on reel cutter.
○
Remove adhesion of cutting
grass, etc.
○
13-3 Maintenance schedule
Use the required tools suitable for the purpose of the maintenance.
* Replace the hydraulic hoses for steering in every 2
