−17−
5-4 Inspection of the hydraulic oil
Level the engine and always check whether
the hydraulic oil is contained to the center of
the oil level gauge. When refilling the
hydraulic oil, use the Shell Tellus S2M46 or
equivalent type.
* Never mix different kind of the hydraulic
oil.
* The tank capacity is approximately 43L.
Oil level gauge
5-5 Cleaning of the air cleaner
Perform the inspection with the vacuum
pressure indicator. If the element of the air
cleaner becomes dirty, the red ring is visible
in the vacuum pressure indicator.
Remove and clean the air cleaner.
Air cleaner
If the element of the air cleaner is dirty, it will
b e c o m e t h e c a u s e o f t h e e n g i n e
malfunction. When it's dirty, clean it by
carefully tapping the element or blowing air
from inside so that the element may not be
damaged. Attach the element after clean up
and push the reset button. Exchange the
element of the air cleaner every 200 hours.
Reset button
Vacuum pressure indicator
5-6 Inspection of the engine and its surroundings
Please refer to "Operating and instruction manual" for engine for
handling of the engine.
1) The parts of the fuel system should 111 check whether there is
neither the crack nor the leak, and replace it with new one if
necessary.
2) When the grass, the leaf, etc. have jammed to the inside of the
muffler, and exhaust pipe or the surroundings, blow out by air.
5-7 Inspection of the tires
Inspect the tire pressure, crack, damage, and unusual wear.
Tire pressure
Front wheel
150kPa (1.5kgf/cm
2
)
Rear wheel
140kPa (1.4kgf/cm
2
)
5-8 Inspection of brake
1) Foot brake
●
Press down the brake pedal to confirm it
functions.
* When it does not function well, adjust or
repair it before operating.
2) Parking brake
●
Please check whether the parking brake
works during pressing foot brake.
●
Please confirm brake is not dragging,
when pressing foot brake and release
the parking brake.
Parking brake lever
When Pulling it,
brake functions
When releasing
it, brake does
not drag.
