−21−
7. Operation method of each part
No.
Decal
Description
No.
Decal
Description
No.
Decal
Description
Explanation of operation panel
Stop
Glow
Start
Mowing
Travelling
4WD
2WD
Backlapping
Reel rotating
Reel stop
Charging battery
Thermo start
HP of engine
Lowering mowers
Raising mowers
Low speed
High speed
a. Travelling –Mowing changeover switch
b. 2WD-4WD changeover switch
c. Reel rotating switch
d. Reel reverse rotation switch
a. Travelling –Mowing changeover switch
b. 2WD-4WD changeover switch
c. Reel rotating switch
d. Reel reverse rotation switch
Switch and levers on the operation panel
Switch and levers on the operation panel
DOWN
(Operation)
UP
HIGH
LOW
ON
OFF
d
a
b
c
e
f
h
g
DOWN
(Operation)
UP
HIGH
LOW
ON
OFF
d
a
b
c
e
f
h
g
e. Pilot lamp
f. Key switch
g. Throttle lever
h Mower unit raise/lower lever
e. Pilot lamp
f. Key switch
g. Throttle lever
h Mower unit raise/lower lever
7-1 About the mechanical operation
Caution
Check whether the operation state of each part is good, and the brake disc, tires, steering,
and mower do not have abnormalities in particular before operating the engine. In any
cases, operate the engine by the speed that can carry out the urgency stop. Locate and
remove all debris, in the operating area before using equipment.
7-2 Before starting engine
Warning
●
Inspect the area where the equipment will be used.
●
Inspect whether there are no damages and the cover/guard are
securely fastened in place.
●
Never operate the engine without proper ventilation.
