Baroness LM180C, Owner'S Operating Manual

Page: 40 / 66

Cutting Work
Cutting Operation
Warning
Do not start to move or stop the machine
abruptly.
Caution
Cutting work must be performed at an
appropriate speed for the site and location.
When cutting bumpy surfaces, keep the
engine rpm steady, and slow down the cutting
speed.
Lower all the mower units.
Start the engine.
"Procedure to Start Engine" (Page 4-12)
Depress the brake pedal, and release the
parking brake.
Move the throttle lever to the "High speed"
position.
Shift the change lever in arbitrary position.
Pull the reel rotation lever to rotate the reel
cutters (cutting cylinders) of the left and right
mower units.
Slowly pull the traveling clutch lever in the
same way as clutch-slipping to move the
machine forward while rotating the reel cutter
(cutting cylinder) of the rear mower unit.
Shift the traveling clutch lever to the "ON"
position, and then start the operation.
Transporting
Transporting Procedure
When loading the machine into a trailer or a
truck to transport it, drive the machine in
reverse. When unloading, drive the machine
forward.
Storage
Before Long-Term Storage
Remove any dirt, grass, debris, or oil stains
completely.
Supply oil and apply grease to appropriate
parts.
1.
2.
3.
4.
5.
6.
7.
8.
･
･
LM180C
Handling Instructions
Page 4-20
Cutting Work