Baroness LM180C, Owner'S Operating Manual

Page: 59 / 66

Adjustment of Wire to Hook Mower
Wire to hook the left / right mower
Loosen the nuts and move the adjustment
bolt toward the outside of the machine to
increase the wire tension.
Without gripping the lever, raise the right
mower unit, then make adjustment so that
the hook metal fitting will be in touch with
the bottom of the hook and the wire will
have a small play.
Tighten the nuts and fix the adjustment bolt
securely.
Follow the same steps to adjust the hook
wire of left mower.
4
3
1 2
5 6
8fihkp-001
Wire to hook the left / right mower_001
1 Nut
2 Adjustment bolt
3 Wire (to hook the mower)
4 Right mower unit
5 Hook metal fitting
6 Bottom of the hook
Wire to hook the rear mower
Loosen the nuts and move the adjustment
bolt toward the center of the machine to
increase the wire tension.
Lower the rear mower unit, then adjust the
hook metal fitting to come into contact
slightly with the lever mounting bracket
when you grip the lever completely.
Tighten the nuts and fix the adjustment bolt
securely.
1.
2.
3.
4.
1.
2.
3.
2
4
5
3
1
569gs3-001
Wire to hook the rear mower_001
1 Nut
2 Adjustment bolt
3 Wire
4 Hook metal fitting
5 Lever mounting bracket
When the hook metal fitting returns to its
original position by spring tension as soon
as you release the lever, raise the rear
mower lifting arm and make sure that the
hook metal fitting is located closer to the
center of the machine than the upper tip of
the hook.
4
1
3
2
569gs3-002
Wire to hook the rear mower_002
1 Hook metal fitting
2 Spring
3 Rear mower lifting arm
4 Hook
4.
Maintenance
LM180C
Maintenance
Page 5-19
Maintenance Work