Groomer Clutch Lever
Note:
Depending on the specifications, this function
may not be available.
Caution
The lever should be operated while the engine
is stopped, and adjusted to the position
suitable for your work.
The groomer clutch lever is located on the
upper side of the right frame and has three
positions.
When the lever is set to the "Normal " position,
the groomer rotates in the same direction as
the reel cutter (cutting cylinder).
When the lever is set to the "Reverse "
position, the groomer rotates in the opposite
direction as the reel cutter (cutting cylinder).
When the lever is set to the "Stop" position, the
groomer will not rotate.
1
A
B
C
aqilnf-004
Groomer Clutch Lever_001
1
Groomer clutch lever
A
Normal
B
Reverse
C
Stop
LH52
Handling Instructions
Page 4-16
Operation of Each Section
