Adjustment of Scraper
Adjustment of Front Scraper
Note:
Depending on the specifications, this function
may not be available.
Important
If the contact between the scraper and the
front roller is too tight, the scraper may
become deformed or the front roller may be
shaved.
The scraper prevents grass clippings, etc.,
from attaching to the front roller.
Loosen the left and right bolts of the
scraper.
2
1
4
3
t4n31r-007
Adjustment of Front Scraper_001
1
Scraper
2
Bolt
3
Washer
4
Spring washer
Adjust the scraper so that there is a
clearance of 2.0 to 3.0 mm (0.079 to 0.118
in) between it and the outer diameter
surface of the front roller, and then firmly
tighten the loosened bolts.
A
1
2
t4n31r-008
Adjustment of Front Scraper_002
1.
2.
1
Scraper
2
Front roller
A
2.0 - 3.0 mm (0.079 - 0.118 in)
Adjustment of Rear Scraper
Note:
Depending on the specifications, this function
may not be available.
Important
Make sure that the scraper does not contact
the rear roller.
Otherwise, the scraper may become deformed
or the rear roller may be damaged.
Important
The rear scraper cannot be installed together
with the CR brush.
The scraper prevents grass clippings, etc.,
from attaching to the rear roller.
Loosen the left and right bolts of the
scraper.
1
4 3
2
t4n31r-009
Adjustment of Rear Scraper_001
1
Scraper
2
Bolt
3
Spring washer
4
Washer
1.
Handling Instructions
LH52
Handling Instructions
Page 4-13
Adjustment Before Operating
