Baroness GM2800A, Owner'S Handling Manual, Page: 4 / 90

Introduction
Thank you for purchasing the Baroness GM2800A, front 5-deck rotary mower.
This manual describes the correct methods for handling, adjusting, and checking the
machine.
Be sure to read this manual and make sure that you understand its contents thoroughly
before using the machine.
Our machines have been tested and inspected thoroughly before shipment from the
factory. However, whether the machine can display its original performance depends on
the handling method, as well as daily checks, adjustments, and lubrication before and after
operation. Keep the machine well maintained to expect safe operation and excellent
performance for an extended period of time.
Note
● Gradual changes may be made to the machine.
When making enquiries about the machine, be sure to specify both the model type and
serial number.
● Please keep this Owner's Manual in a box behind the seat.
● The information described in this manual may change without prior notice.
● The warning labels that are attached to the machine and used in this owner's manual
contain information to maintain safety. Please read the operating procedures and safety
precautions carefully and only operate the machine after you have understood them
completely.
● The warning labels and their descriptions should be preserved in their entirety. If they
are lost or damaged, please replace them immediately with new ones.
● Do not, under any circumstances, remove the warning labels that are attached to the
machine.
• • • About operation
Caution
- 1 -
Introduction
Read this manual carefully to thoroughly understand the proper operating and maintenance
methods of your mower, and to avoid causing injury to yourself and to others. The operator
is responsible for operating this machine properly and safely.
For questions concerning maintenance or genuine parts, please contact your local
Baroness dealer. When making inquiries about your mower, please specify the mower's
model number and serial number.
Safety
This machine meets CEN standard EN 836:1997 (by affixing the specified label) for ride-on
lawn mowers at the time of production.
Improper use or maintenance can result in injury or death. To prevent an accident, be sure
to follow the safety precautions described below and always pay attention to the warning
symbols. The warning symbols are displayed as CAUTION, WARNING, or DANGER, and
all symbols describe important safety precautions. Failure to thoroughly follow these safety
precautions can cause an accident resulting in injury or death.
Safety management
The following instructions are taken from CEN standard EN 836:1997, ISO standard
5395:1990.
Intended uses
Use the mower for the purpose it is intended for, that is cutting grass on lawns.
Any other use could be dangerous or damage the equipment.