Baroness GM2800A, Owner'S Handling Manual, Page: 22 / 90

- 19 -
● Turn the blade rotation switch to "ON" just before starting the
cutting work. When you do not work, be sure to turn it to "OFF".
● Start operation after checking that people are not in the
surroundings of the machine.
Caution
Tilt steering
3-11
Pull lever up to release steering column.
Tilt column up or down to position desired.
Push lever back to lock steering column in
place.
Lock
Tilt lever
Steering
Release
● Never adjust steering while machine is moving.
● To prevent serious accidents, ensure tilt steering lever is
fastened during operation.
Caution
Switches, levers on the operation panel
3-12
a. Blade rotation switch
b. 2WD-4WD changeover switch
c. Headlight switch
d. Throttle lever
e. Mower unit raise/lower lever
a b c
e d
Blade rotation switch
3-13
When the blade rotation switch is turned to
"ON", the rotary blade will rotate, and when it
moves to "OFF", the rotation of the rotary
blade will stop.
When the mower has gone up, the knife does
not rotate.
*
When the blade rotation switch is "ON",
regardless of 2WD-4WD changeover
switch, it becomes "4WD".
Blade rotation switch
Rotation Stop
Adjustment of seat
3-10
● The seat can be adjusted forward and
backward by the seat lever
1
.
●
Angle adjustment of the reclining backrest
can be performed by the lever
2 .
● Hardness of the seat suspension can be
adjusted by turning the handle
3 Check
and adjust with the scale 4 . (50~130kgf)
● Angle setting of the armrest can be
performed by turning the knob
5 ).
● The height of the seat can adjust to the
three steps by lifting the whole seat.
Three
step