G
ENERAL
S
PECIFICATIONS
Pollution Degree**
2
Installation Category**
II
Altitude
2000 meters MSL (Mean Sea Level)
Relative Humidity
20% to 80% maximum, non-condensing
Electrical Supply
120 VAC or 240 VAC
Voltage Tolerance
+10% of normal rated line
Temperature
0°C to 40°C
Product Usage
This product is intended for use indoors
only
Environmental Operating Conditions
**Refer to IEC 664-1
8
Declaration of Conformity
(for CE models only)
Barnstead International hereby declares under its sole responsibility that this product conforms with the tech-
nical requirements of the following standards:
EMC:
EN 61000-3-2
Limits for harmonic current emissions
EN 61000-3-3
Limits for voltage fluctuations and flicker
EN 61326-1
Electrical equipment for measurement, control, and
laboratory use; Part I: General Requirements
Safety:
EN 61010-1
Safety requirements for electrical equipment for
measurement, control, and laboratory use;
Part I: General Requirements
EN 61010-2-051
Part II: Particular requirements for laboratory equipment for
mixing and stirring
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC, as amended by 92/31/EEC and
93/68/EEC, and per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Electrothermal Engineering Ltd.
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available upon request.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
