17
Setting Timer for Continuous Shaking
1.
Press TIMER/ELAPSED membrane switch until
ELAPSED light is illuminated. The HOURS or
MINUTES light will also light up at this point
depending on which option was previously cho-
sen.
2.
Press HOURS/MINUTES membrane switch for
desired timing mode.
3.
TIME display should show 000. Press START to
begin timed shaking. Timer will begin to count
up and will display accumulated time in display
window. Platform rotation will cease and TIME
display will flash when ELAPSED time reaches
999 minutes or 999 hours.
RS232 Interface Port
The RS232 interface port is located on the left side rear of
the shaker cabinet and requires the use of a laptop or
desk top computer running Microsoft Windows 98 or
newer operating system.
RS232 Interface Port
O
PERATION
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
