19
Maintenance
Cleaning
Wash the exterior of the unit with a soft cloth using a
solution of mild soap and water, rinse off with clean water
and dry thoroughly.
Suggested with every 3 months of constant use
Any internal adjustments or repairs must be performed by
a qualified service representative.
Remove the platform by loosening 4 flat head screws in
the platform center. Remove the sheet metal panel under
the platform to expose the belt and interior parts. Inspect
the drive belt for wear and proper tension. Order a
replacement if necessary.
SHKA2000 and SHKA2000-1CE only
1.
Take out the 3 large motor mount screws and lift
the motor out.
2.
2 brushes are located under plastic caps on
opposite sides of the lower part of the motor.
Unscrew the plastic caps and slide the brushes
out. Replace brushes when they are worn down
to 3/16" (.48 cm) in length.
3.
Belt tension is automatically set by the location
of the motor and is not adjustable.
4.
To align a pulley, loosen the motor pulley set
screw, slide the pulley up or down into alignment
then securely tighten the motor pulley set screw.
Maintenance
Note
Make no attempt to service or repair
a Barnstead|Labline product under
warranty before consulting your
Barnstead International dealer. After
the warranty period, such consulta-
tion is still advised, especially when
the repair may be technically sophis-
ticated or difficult. If assistance is
needed beyond what the distributor
can provide, please call Barnstead
International Customer Service at
800-553-0039. No merchandise
should be returned directly to
Barnstead International without prior
approval from Barnstead
International.
Warning
Disconnect plug from electrical outlet
before attempting any maintenance or
repair of this unit.
Note
The shaking mechanism is equipped
with sealed ball bearings which do
not require further lubrication or
adjustment.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
