Barnes thermoplay TH-M6, User Manual

Page: 46 / 71

46
13 Auto Tuning enabled
(The tuning of PID parameters will be performed if
selected at the heating start)
- 0=Off,1=On On
14 Pb (Proportional band, calculated during TUNE
phase)
1 °C 0 199.9 16.4
15 Int (Integral Time, calculated during TUNE phase) 0 sec 0 999 16
16 Der (Derivative time, calculated during TUNE phase) 0 sec 0 999 3
17 Integral preload 0 % 0 100 0
18 Fuzzy overshoot control (calculated during TUNE
phase)
1 - 0.1 10.0 0.4
19 SP MIN (Set Point minimum value) 0 °C 0 SPMAX 50
20 SP MAX (Set Point maximum value) 0 °C SPMIN 999 400
21 Ramp up (GR+)
(working Set Point increasing ramp)
1 °C/min 0 99.9, 100.0=Max 20.0
22 Ramp Dn (GR-)
(working Set Point decreasing ramp)
1 °C/min 0 99.9, 100.0=Max 100.0
23 MaxPowRatio (RNP) 0 % 0 100 100
24 Time duration of the Soft Start 0 min 0 200 4
28 Average power (according to common parameter
Idx 35)
2 % 0 10000 Read-only
29 Loop break alarm Time 0 sec 0 500 0
30 Loop break alarm step softstart 0 °C 0 100 0
31 Loop break alarm 0 °C 0 100 5
40 Saved A0 Auto Tuning 0 sec -- Read-only
41 Saved A1 Auto Tuning 1 °C -- Read-only